Author Archives: FaxVoip Software

Fax Voip FSP Extended Incoming Routing Unlimited number of Rules License (E-mail, Store in Folder, Print)

NOTE: Fax Voip FSP Extended Incoming Routing (E-mail, Store in Folder, Print) license is the extention to Fax Voip Windows Fax Service Provider Lines license and can not be used independently. This license allows to significantly increase the maximum number of available rules, that can be used with the following Incoming Fax Routing Methods: Route through e-mail (Fax Voip FSP Routing Extension), Store in Folder (Fax Voip FSP Routing Extension), Print (Fax Voip FSP Routing Extension).
Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing. Fax Routing Extension: Route through e-mail, Store in a folder, Print, Custom Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP Routing Extension allows you to route incoming faxes depending on the Caller Number (Caller ID) and Called Number (DID), using the following fax routing methods: Route through e-mail, Store in a folder, Print. Custom routing for incoming faxes allows you to easy add any routing functionality by using custom application that is started after receiving a fax.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 572.79
Total: EUR 572.79
plus 19% sales tax/VAT to EUR 572.79: EUR 108.83
EUR 681.62
Delivery: License key by e-mail
Version: 2.2.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows Server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip FSP Extended Incoming Routing 50 Rules License (E-mail, Store in Folder, Print)

NOTE: Fax Voip FSP Extended Incoming Routing (E-mail, Store in Folder, Print) license is the extention to Fax Voip Windows Fax Service Provider Lines license and can not be used independently. This license allows to significantly increase the maximum number of available rules, that can be used with the following Incoming Fax Routing Methods: Route through e-mail (Fax Voip FSP Routing Extension), Store in Folder (Fax Voip FSP Routing Extension), Print (Fax Voip FSP Routing Extension).
Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing. Fax Routing Extension: Route through e-mail, Store in a folder, Print, Custom Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP Routing Extension allows you to route incoming faxes depending on the Caller Number (Caller ID) and Called Number (DID), using the following fax routing methods: Route through e-mail, Store in a folder, Print. Custom routing for incoming faxes allows you to easy add any routing functionality by using custom application that is started after receiving a fax.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 421.58
Total: EUR 421.58
plus 19% sales tax/VAT to EUR 421.58: EUR 80.10
EUR 501.68
Delivery: License key by e-mail
Version: 2.2.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows Server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip FSP Extended Incoming Routing 5 Rules License (E-mail, Store in Folder, Print)

NOTE: Fax Voip FSP Extended Incoming Routing (E-mail, Store in Folder, Print) license is the extention to Fax Voip Windows Fax Service Provider Lines license and can not be used independently. This license allows to significantly increase the maximum number of available rules, that can be used with the following Incoming Fax Routing Methods: Route through e-mail (Fax Voip FSP Routing Extension), Store in Folder (Fax Voip FSP Routing Extension), Print (Fax Voip FSP Routing Extension).
Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing. Fax Routing Extension: Route through e-mail, Store in a folder, Print, Custom Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP Routing Extension allows you to route incoming faxes depending on the Caller Number (Caller ID) and Called Number (DID), using the following fax routing methods: Route through e-mail, Store in a folder, Print. Custom routing for incoming faxes allows you to easy add any routing functionality by using custom application that is started after receiving a fax.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 82.48
Total: EUR 82.48
plus 19% sales tax/VAT to EUR 82.48: EUR 15.67
EUR 98.15
Delivery: License key by e-mail
Version: 2.2.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows Server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip FSP Extended Incoming Routing 20 Rules License (E-mail, Store in Folder, Print)

NOTE: Fax Voip FSP Extended Incoming Routing (E-mail, Store in Folder, Print) license is the extention to Fax Voip Windows Fax Service Provider Lines license and can not be used independently. This license allows to significantly increase the maximum number of available rules, that can be used with the following Incoming Fax Routing Methods: Route through e-mail (Fax Voip FSP Routing Extension), Store in Folder (Fax Voip FSP Routing Extension), Print (Fax Voip FSP Routing Extension).
Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing. Fax Routing Extension: Route through e-mail, Store in a folder, Print, Custom Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP Routing Extension allows you to route incoming faxes depending on the Caller Number (Caller ID) and Called Number (DID), using the following fax routing methods: Route through e-mail, Store in a folder, Print. Custom routing for incoming faxes allows you to easy add any routing functionality by using custom application that is started after receiving a fax.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 233.70
Total: EUR 233.70
plus 19% sales tax/VAT to EUR 233.70: EUR 44.40
EUR 278.10
Delivery: License key by e-mail
Version: 2.2.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows Server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip FSP Extended Incoming Routing 10 Rules License (E-mail, Store in Folder, Print)

NOTE: Fax Voip FSP Extended Incoming Routing (E-mail, Store in Folder, Print) license is the extention to Fax Voip Windows Fax Service Provider Lines license and can not be used independently. This license allows to significantly increase the maximum number of available rules, that can be used with the following Incoming Fax Routing Methods: Route through e-mail (Fax Voip FSP Routing Extension), Store in Folder (Fax Voip FSP Routing Extension), Print (Fax Voip FSP Routing Extension).
Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing. Fax Routing Extension: Route through e-mail, Store in a folder, Print, Custom Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP Routing Extension allows you to route incoming faxes depending on the Caller Number (Caller ID) and Called Number (DID), using the following fax routing methods: Route through e-mail, Store in a folder, Print. Custom routing for incoming faxes allows you to easy add any routing functionality by using custom application that is started after receiving a fax.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 142.05
Total: EUR 142.05
plus 19% sales tax/VAT to EUR 142.05: EUR 26.99
EUR 169.04
Delivery: License key by e-mail
Version: 2.2.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows Server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip Windows Fax Service Provider License for 8 Lines (T.38 and Audio Fax, SIP, H.323)

Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 427.29
Total: EUR 427.29
plus 19% sales tax/VAT to EUR 427.29: EUR 81.18
EUR 508.47
Delivery: License key by e-mail
Version: 2.1.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip Windows Fax Service Provider License for 48 Lines (T.38 and Audio Fax, SIP, H.323)

Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 1,964.59
Total: EUR 1,964.59
plus 19% sales tax/VAT to EUR 1,964.59: EUR 373.27
EUR 2,337.86
Delivery: License key by e-mail
Version: 2.1.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip Windows Fax Service Provider License for 4 Lines (T.38 and Audio Fax, SIP, H.323)

Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 236.87
Total: EUR 236.87
plus 19% sales tax/VAT to EUR 236.87: EUR 45.00
EUR 281.87
Delivery: License key by e-mail
Version: 2.1.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip Windows Fax Service Provider License for 32 Lines (T.38 and Audio Fax, SIP, H.323)

Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 1,384.04
Total: EUR 1,384.04
plus 19% sales tax/VAT to EUR 1,384.04: EUR 262.97
EUR 1,647.01
Delivery: License key by e-mail
Version: 2.1.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip Windows Fax Service Provider License for 2 Lines (T.38 and Audio Fax, SIP, H.323)

Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 176.49
Total: EUR 176.49
plus 19% sales tax/VAT to EUR 176.49: EUR 33.53
EUR 210.02
Delivery: License key by e-mail
Version: 2.1.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip Windows Fax Service Provider License for 16 Lines (T.38 and Audio Fax, SIP, H.323)

Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 770.98
Total: EUR 770.98
plus 19% sales tax/VAT to EUR 770.98: EUR 146.49
EUR 917.47
Delivery: License key by e-mail
Version: 2.1.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

Fax Voip Windows Fax Service Provider License for 1 Line (T.38 and Audio Fax, SIP, H.323)

Fax Voip Windows Fax Service Provider enables Microsoft Fax and Windows Fax and Scan, which are built into Windows, to send and receive T.38 and Audio Faxes using VoIP. ECM (Error Correction Mode) support. Multiple SIP Registrations. Call Routing.
Fax Voip Windows Fax Service Provider (Fax Voip FSP) enables Microsoft Fax and Windows Fax and Scan, which are built right into Windows, to send and receive T.38 and audio (over G.711 codec) faxes using your VoIP (SIP or H.323) infrastructure without any further cost.
Windows Fax Service and Windows Fax and Scan application is an integrated fax software included in all Windows versions. It is an extensible fax platform that you can use to deploy shared fax resources in your organization. Users within an organization can install a connection to a remote fax printer on a network fax server and send and receive faxes using shared fax devices located on the server, as well as from a local fax device attached to their computers. Fax administrators can configure, manage, and monitor these shared fax resources. Centralized management of server-based shared fax devices means easier management and maintenance, and lower costs. Fax users can send and receive faxes without the need to use manual fax machines, saving time and effort.
Fax Voip FSP replaces the standard Microsoft Modem Device Provider by the Fax Voip T.38/G.711FAX Device Provider. This allows you to use the Windows Fax Service most efficiently. In particular, the ECM (Error Correction Mode) is supported. The busy signal is also detected correct way. Using Fax Service Provider (FSP) instead of Virtual COM Ports and modems significantly improves reliability of your fax system.
Fax Voip FSP allows Windows Fax and Scan to receive Caller ID and Called Number (DID) – via Routing Information field.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip FSP has been successfully tested with Callcentric, babyTEL, T38FAX and many other VoIP service providers.

Unit Price: EUR 106.82
Total: EUR 106.82
plus 19% sales tax/VAT to EUR 106.82: EUR 20.30
EUR 127.12
Delivery: License key by e-mail
Version: 2.1.1
Language: English
Platform: Windows Server 2003, Windows XP x32, Windows server 2012, Windows Server 2008, Windows 7 x32, Windows 7 x64, Windows 8, Windows Server 2008 R2, Windows 8 x32, Windows 8 x64, Windows 7, Windows Vista x64, Windows Vista x32, Windows 8.1, Windows 10, Windows XP x64, Windows Server 2003 x64
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2016/2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)

FaxBoom 2 SIP FAX Line

Fax Boom: It is now possible to send faxes over Betamax SIP network. Fax Boom – fully-functional system of sending and receiving faxes over the Internet in real time (FOIP). Thanks to the support “FAX over G711” Fax Boom can send faxes through a network of SIP providers that do not support the protocol t38. You can send faxes through Betamax SIP network (Voipbuster, Sipdiscount, Internetcalls …) Of course, high-quality t38 fax protocol is also supported. What is Fax Boom? It is a SIP client with T38 and AUDIO Fax support. With Fax Boom you can send and receive T38 or AUDIO faxes without any hardware,additional Fax Software is not required.. You can use Fax Boom with your IP-SIP-PBX and with your SIP-Provider. It is possible to receive T38 or AUDIO faxes directly into TIFF or PDF files without using a standard fax software, and without limiting the number of incoming fax sessions. Fax Boom is a fully-functional system for receiving faxes to e-mail (Fax -> Mail). Fax -> Mail function allows you to receive faxes as e-mails with either PDF or TIFF attachments. The Mail -> Fax function allows you to send faxes directly from your email program (e.g. Outlook Express).

Unit Price: EUR 100.00
Total: EUR 100.00
plus 19% sales tax/VAT to EUR 100.00: EUR 19.00
EUR 119.00
Delivery: License key by e-mail
Version: 3.5.1
Language: English
General requirements: Microsoft.NET Framework 2.0 Service Pack 1



Tags: Fax Boom, SIP FAX Line, Betamax SIP network, AUDIO Fax support, hardware,additional Fax Software, faxes, incoming fax sessions, standard fax software, fax protocol, AUDIO faxes, Fax function, program (e.g., EUR, SIP providers, SIP client, real time, TIFF attachments, Microsoft.NET Framework, PDF files, Outlook Express, Unit Price, General requirements, Service Pack, sales tax/VAT, Mail function, e-mail, FOIP, Thanks, FaxBoom, Internet, e-mails, ldquo, G711&rdquo, course, Voipbuster, Sipdiscount, Internetcalls, Version, Language

FaxBoom 16 SIP FAX Line

Fax Boom: It is now possible to send faxes over Betamax SIP network. Fax Boom – fully-functional system of sending and receiving faxes over the Internet in real time (FOIP). Thanks to the support “FAX over G711” Fax Boom can send faxes through a network of SIP providers that do not support the protocol t38. You can send faxes through Betamax SIP network (Voipbuster, Sipdiscount, Internetcalls …) Of course, high-quality t38 fax protocol is also supported. What is Fax Boom? It is a SIP client with T38 and AUDIO Fax support. With Fax Boom you can send and receive T38 or AUDIO faxes without any hardware,additional Fax Software is not required.. You can use Fax Boom with your IP-SIP-PBX and with your SIP-Provider. It is possible to receive T38 or AUDIO faxes directly into TIFF or PDF files without using a standard fax software, and without limiting the number of incoming fax sessions. Fax Boom is a fully-functional system for receiving faxes to e-mail (Fax -> Mail). Fax -> Mail function allows you to receive faxes as e-mails with either PDF or TIFF attachments. The Mail -> Fax function allows you to send faxes directly from your email program (e.g. Outlook Express).

Unit Price: EUR 800.00
Total: EUR 800.00
plus 19% sales tax/VAT to EUR 800.00: EUR 152.00
EUR 952.00
Delivery: License key by e-mail
Version: 3.5.1
Language: English
General requirements: Microsoft.NET Framework 2.0 Service Pack 1



Tags: Fax Boom, SIP FAX Line, Betamax SIP network, AUDIO Fax support, hardware,additional Fax Software, faxes, incoming fax sessions, standard fax software, fax protocol, AUDIO faxes, Fax function, program (e.g., EUR, SIP providers, SIP client, real time, TIFF attachments, Microsoft.NET Framework, PDF files, Outlook Express, Unit Price, General requirements, Service Pack, sales tax/VAT, Mail function, e-mail, FOIP, Thanks, FaxBoom, Internet, e-mails, ldquo, G711&rdquo, course, Voipbuster, Sipdiscount, Internetcalls, Version, Language

FaxBoom 1 SIP FAX Line

Fax Boom: It is now possible to send faxes over Betamax SIP network. Fax Boom – fully-functional system of sending and receiving faxes over the Internet in real time (FOIP). Thanks to the support “FAX over G711” Fax Boom can send faxes through a network of SIP providers that do not support the protocol t38. You can send faxes through Betamax SIP network (Voipbuster, Sipdiscount, Internetcalls …) Of course, high-quality t38 fax protocol is also supported. What is Fax Boom? It is a SIP client with T38 and AUDIO Fax support. With Fax Boom you can send and receive T38 or AUDIO faxes without any hardware,additional Fax Software is not required.. You can use Fax Boom with your IP-SIP-PBX and with your SIP-Provider. It is possible to receive T38 or AUDIO faxes directly into TIFF or PDF files without using a standard fax software, and without limiting the number of incoming fax sessions. Fax Boom is a fully-functional system for receiving faxes to e-mail (Fax -> Mail). Fax -> Mail function allows you to receive faxes as e-mails with either PDF or TIFF attachments. The Mail -> Fax function allows you to send faxes directly from your email program (e.g. Outlook Express).

Unit Price: EUR 50.00
Total: EUR 50.00
plus 19% sales tax/VAT to EUR 50.00: EUR 9.50
EUR 59.50
Delivery: License key by e-mail
Version: 3.5.1
Language: English
General requirements: Microsoft.NET Framework 2.0 Service Pack 1



Tags: Fax Boom, SIP FAX Line, Betamax SIP network, AUDIO Fax support, hardware,additional Fax Software, faxes, incoming fax sessions, standard fax software, fax protocol, AUDIO faxes, Fax function, program (e.g., EUR, SIP providers, SIP client, real time, TIFF attachments, Microsoft.NET Framework, PDF files, Outlook Express, Unit Price, General requirements, Service Pack, sales tax/VAT, Mail function, e-mail, FOIP, Thanks, FaxBoom, Internet, e-mails, ldquo, G711&rdquo, course, Voipbuster, Sipdiscount, Internetcalls, Version, Language

Fax Voip built-in VOIP/ISDN Fax Lines License for 8 Fax Lines (T38 and audio fax)

Fax Voip T38 Fax & Voice – Fax and Answering Machine for your SIP/H.323/ISDN CAPI 2.0 line. Support for Multiple SIP Registrations. Call Routing. Voice Fax Modem for your Fax & Voice software. Color faxes over VOIP and ISDN. Incoming Fax Routing: Route through e-mail, Store in a folder, Print. Fax-On-Demand.
What is Fax Voip? From the perspective of your fax or voice application, it is a Voice Fax Modem. Fax Voip installs virtual COM ports and virtual Fax Voip 14.4K TAPI Voice-Fax Modems onto your system. You can setup your Fax & Voice program to work with Fax Voip COM ports or virtual modems. From the perspective of your VOIP internet network, it’s a SIP/H.323 client with T.38 and G.711 Fax support. From the perspective of your ISDN line, it’s CAPI 2.0 client with audio fax support. With Fax Voip you can send and receive T.38 and audio (color and black-and-white) faxes and voice messages without any hardware, using your favourite Fax & Voice program. Fax Voip is the ideal solution for the implementation of Fax and Voice Mailbox into SIP, H.323 or ISDN network. You can use Fax Voip with your VOIP or ISDN-based PBX or with your SIP/H.323/ISDN Provider. Fax Voip can also support from 1 to 100 virtual lines simultaneously.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip supports Caller ID and Dial a Phone Number Extension features.
It is possible to send T.38, audio and CAPI faxes via Fax Voip Virtual Printer and receive faxes directly in TIFF, PDF or SFF files without using fax software, and without limiting the number of incoming fax sessions. You can manage faxes with Fax Voip Console.
Fax Voip is a fully-functional system for sending faxes via e-mail (Mail to Fax) and for receiving faxes to e-mail (Fax to Mail).
Incoming Routing Methods (Route through e-mail, Store in a folder, Print) allow you to route incoming faxes to recipients on the network.
Fax on Demand function allows callers to retrieve information via fax on the same call (from a fax machine).
Fax Voip T38 Fax & Voice has been successfully tested with Microsoft Fax, CallStation, BVRP Classic Phone Tools 9, FaxTalk Messenger Pro, WinFax Pro, Venta Fax & Voice (include color faxes) and many other well-known programs.

Unit Price: EUR 450.07
Total: EUR 450.07
plus 19% sales tax/VAT to EUR 450.07: EUR 85.51
EUR 535.58
Delivery: License key by e-mail
Version: 7.4.1
Language: English
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)



Tags: Fax Voip, Fax Voip T38, Voip T38 Fax, virtual Fax Voip, Voice Fax Modem, Fax Voip COM, Fax Voip Virtual, Fax Voip Console, VOIP/ISDN Fax Lines, audio fax, audio fax support, incoming fax sessions, Fax Routing, favourite Fax, fax software, Venta Fax, fax machine, Microsoft Fax, VOIP internet network, Multiple SIP Registrations, .NET Framework, Microsoft .NET Framework, CAPI faxes, incoming faxes, Voice program, TAPI Voice-Fax Modems, virtual COM ports, color faxes, Number Extension features, BVRP Classic Phone, amp, FaxTalk Messenger Pro, SIP/H.323/ISDN CAPI, Voice software, voice application, voice messages, Voice Mailbox, different SIP, EUR, Routing functions, ISDN line, ISDN network, virtual modems, Answering Machine, H.323 providers, virtual lines, ISDN-based PBX, WinFax Pro

Fax Voip built-in VOIP/ISDN Fax Lines License for 2 Fax Lines (T38 and audio fax)

Fax Voip T38 Fax & Voice – Fax and Answering Machine for your SIP/H.323/ISDN CAPI 2.0 line. Support for Multiple SIP Registrations. Call Routing. Voice Fax Modem for your Fax & Voice software. Color faxes over VOIP and ISDN. Incoming Fax Routing: Route through e-mail, Store in a folder, Print. Fax-On-Demand.
What is Fax Voip? From the perspective of your fax or voice application, it is a Voice Fax Modem. Fax Voip installs virtual COM ports and virtual Fax Voip 14.4K TAPI Voice-Fax Modems onto your system. You can setup your Fax & Voice program to work with Fax Voip COM ports or virtual modems. From the perspective of your VOIP internet network, it’s a SIP/H.323 client with T.38 and G.711 Fax support. From the perspective of your ISDN line, it’s CAPI 2.0 client with audio fax support. With Fax Voip you can send and receive T.38 and audio (color and black-and-white) faxes and voice messages without any hardware, using your favourite Fax & Voice program. Fax Voip is the ideal solution for the implementation of Fax and Voice Mailbox into SIP, H.323 or ISDN network. You can use Fax Voip with your VOIP or ISDN-based PBX or with your SIP/H.323/ISDN Provider. Fax Voip can also support from 1 to 100 virtual lines simultaneously.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip supports Caller ID and Dial a Phone Number Extension features.
It is possible to send T.38, audio and CAPI faxes via Fax Voip Virtual Printer and receive faxes directly in TIFF, PDF or SFF files without using fax software, and without limiting the number of incoming fax sessions. You can manage faxes with Fax Voip Console.
Fax Voip is a fully-functional system for sending faxes via e-mail (Mail to Fax) and for receiving faxes to e-mail (Fax to Mail).
Incoming Routing Methods (Route through e-mail, Store in a folder, Print) allow you to route incoming faxes to recipients on the network.
Fax on Demand function allows callers to retrieve information via fax on the same call (from a fax machine).
Fax Voip T38 Fax & Voice has been successfully tested with Microsoft Fax, CallStation, BVRP Classic Phone Tools 9, FaxTalk Messenger Pro, WinFax Pro, Venta Fax & Voice (include color faxes) and many other well-known programs.

Unit Price: EUR 185.90
Total: EUR 185.90
plus 19% sales tax/VAT to EUR 185.90: EUR 35.32
EUR 221.22
Delivery: License key by e-mail
Version: 7.4.1
Language: English
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)



Tags: Fax Voip, Fax Voip T38, Voip T38 Fax, virtual Fax Voip, Voice Fax Modem, Fax Voip COM, Fax Voip Virtual, Fax Voip Console, VOIP/ISDN Fax Lines, audio fax, audio fax support, incoming fax sessions, Fax Routing, favourite Fax, fax software, Venta Fax, fax machine, Microsoft Fax, VOIP internet network, Multiple SIP Registrations, .NET Framework, Microsoft .NET Framework, CAPI faxes, incoming faxes, Voice program, TAPI Voice-Fax Modems, virtual COM ports, color faxes, Number Extension features, BVRP Classic Phone, amp, FaxTalk Messenger Pro, SIP/H.323/ISDN CAPI, Voice software, voice application, voice messages, Voice Mailbox, different SIP, EUR, Routing functions, ISDN line, ISDN network, virtual modems, Answering Machine, H.323 providers, virtual lines, ISDN-based PBX, WinFax Pro

Fax Voip built-in VOIP/ISDN Fax Lines License for 16 Fax Lines (T38 and audio fax)

Fax Voip T38 Fax & Voice – Fax and Answering Machine for your SIP/H.323/ISDN CAPI 2.0 line. Support for Multiple SIP Registrations. Call Routing. Voice Fax Modem for your Fax & Voice software. Color faxes over VOIP and ISDN. Incoming Fax Routing: Route through e-mail, Store in a folder, Print. Fax-On-Demand.
What is Fax Voip? From the perspective of your fax or voice application, it is a Voice Fax Modem. Fax Voip installs virtual COM ports and virtual Fax Voip 14.4K TAPI Voice-Fax Modems onto your system. You can setup your Fax & Voice program to work with Fax Voip COM ports or virtual modems. From the perspective of your VOIP internet network, it’s a SIP/H.323 client with T.38 and G.711 Fax support. From the perspective of your ISDN line, it’s CAPI 2.0 client with audio fax support. With Fax Voip you can send and receive T.38 and audio (color and black-and-white) faxes and voice messages without any hardware, using your favourite Fax & Voice program. Fax Voip is the ideal solution for the implementation of Fax and Voice Mailbox into SIP, H.323 or ISDN network. You can use Fax Voip with your VOIP or ISDN-based PBX or with your SIP/H.323/ISDN Provider. Fax Voip can also support from 1 to 100 virtual lines simultaneously.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip supports Caller ID and Dial a Phone Number Extension features.
It is possible to send T.38, audio and CAPI faxes via Fax Voip Virtual Printer and receive faxes directly in TIFF, PDF or SFF files without using fax software, and without limiting the number of incoming fax sessions. You can manage faxes with Fax Voip Console.
Fax Voip is a fully-functional system for sending faxes via e-mail (Mail to Fax) and for receiving faxes to e-mail (Fax to Mail).
Incoming Routing Methods (Route through e-mail, Store in a folder, Print) allow you to route incoming faxes to recipients on the network.
Fax on Demand function allows callers to retrieve information via fax on the same call (from a fax machine).
Fax Voip T38 Fax & Voice has been successfully tested with Microsoft Fax, CallStation, BVRP Classic Phone Tools 9, FaxTalk Messenger Pro, WinFax Pro, Venta Fax & Voice (include color faxes) and many other well-known programs.

Unit Price: EUR 812.09
Total: EUR 812.09
plus 19% sales tax/VAT to EUR 812.09: EUR 154.30
EUR 966.39
Delivery: License key by e-mail
Version: 7.4.1
Language: English
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)



Tags: Fax Voip, Fax Voip T38, Voip T38 Fax, virtual Fax Voip, Voice Fax Modem, Fax Voip COM, Fax Voip Virtual, Fax Voip Console, VOIP/ISDN Fax Lines, audio fax, audio fax support, incoming fax sessions, Fax Routing, favourite Fax, fax software, Venta Fax, fax machine, Microsoft Fax, VOIP internet network, Multiple SIP Registrations, .NET Framework, Microsoft .NET Framework, CAPI faxes, incoming faxes, Voice program, TAPI Voice-Fax Modems, virtual COM ports, color faxes, Number Extension features, BVRP Classic Phone, amp, FaxTalk Messenger Pro, SIP/H.323/ISDN CAPI, Voice software, voice application, voice messages, Voice Mailbox, different SIP, EUR, Routing functions, ISDN line, ISDN network, virtual modems, Answering Machine, H.323 providers, virtual lines, ISDN-based PBX, WinFax Pro

Fax Voip built-in VOIP/ISDN Fax Lines License for 1 Fax Line (T38 and audio fax)

Fax Voip T38 Fax & Voice – Fax and Answering Machine for your SIP/H.323/ISDN CAPI 2.0 line. Support for Multiple SIP Registrations. Call Routing. Voice Fax Modem for your Fax & Voice software. Color faxes over VOIP and ISDN. Incoming Fax Routing: Route through e-mail, Store in a folder, Print. Fax-On-Demand.
What is Fax Voip? From the perspective of your fax or voice application, it is a Voice Fax Modem. Fax Voip installs virtual COM ports and virtual Fax Voip 14.4K TAPI Voice-Fax Modems onto your system. You can setup your Fax & Voice program to work with Fax Voip COM ports or virtual modems. From the perspective of your VOIP internet network, it’s a SIP/H.323 client with T.38 and G.711 Fax support. From the perspective of your ISDN line, it’s CAPI 2.0 client with audio fax support. With Fax Voip you can send and receive T.38 and audio (color and black-and-white) faxes and voice messages without any hardware, using your favourite Fax & Voice program. Fax Voip is the ideal solution for the implementation of Fax and Voice Mailbox into SIP, H.323 or ISDN network. You can use Fax Voip with your VOIP or ISDN-based PBX or with your SIP/H.323/ISDN Provider. Fax Voip can also support from 1 to 100 virtual lines simultaneously.
Multiple SIP Registrations and Call Routing functions make your system the most flexible as well as allowing you to work with different SIP and H.323 providers simultaneously.
Fax Voip supports Caller ID and Dial a Phone Number Extension features.
It is possible to send T.38, audio and CAPI faxes via Fax Voip Virtual Printer and receive faxes directly in TIFF, PDF or SFF files without using fax software, and without limiting the number of incoming fax sessions. You can manage faxes with Fax Voip Console.
Fax Voip is a fully-functional system for sending faxes via e-mail (Mail to Fax) and for receiving faxes to e-mail (Fax to Mail).
Incoming Routing Methods (Route through e-mail, Store in a folder, Print) allow you to route incoming faxes to recipients on the network.
Fax on Demand function allows callers to retrieve information via fax on the same call (from a fax machine).
Fax Voip T38 Fax & Voice has been successfully tested with Microsoft Fax, CallStation, BVRP Classic Phone Tools 9, FaxTalk Messenger Pro, WinFax Pro, Venta Fax & Voice (include color faxes) and many other well-known programs.

Unit Price: EUR 112.52
Total: EUR 112.52
plus 19% sales tax/VAT to EUR 112.52: EUR 21.38
EUR 133.90
Delivery: License key by e-mail
Version: 7.4.1
Language: English
General requirements: Microsoft .NET Framework 4.5 or later (Windows 10/8.1/8/7/Vista or Server 2012R2/2012/2008R2/2008); Microsoft .NET Framework 2.0 Service Pack 1 or later (Windows XP or Server 2003)



Tags: Fax Voip, Fax Voip T38, Voip T38 Fax, virtual Fax Voip, Voice Fax Modem, Fax Voip COM, Fax Voip Virtual, Fax Voip Console, VOIP/ISDN Fax Lines, audio fax, audio fax support, incoming fax sessions, Fax Routing, favourite Fax, fax software, Venta Fax, fax machine, Microsoft Fax, VOIP internet network, Multiple SIP Registrations, .NET Framework, Microsoft .NET Framework, CAPI faxes, incoming faxes, Voice program, TAPI Voice-Fax Modems, virtual COM ports, color faxes, Number Extension features, BVRP Classic Phone, amp, FaxTalk Messenger Pro, SIP/H.323/ISDN CAPI, Voice software, voice application, voice messages, Voice Mailbox, different SIP, EUR, ISDN line, Routing functions, ISDN network, virtual modems, Answering Machine, H.323 providers, virtual lines, ISDN-based PBX, WinFax Pro

Fax Voip SoftPhone Basic License (Voice, Fax, Playing, Recording, RND)

Fax Voip Softphone – SIP/H.323 software telephone. Call Recording. Playing audio messages into the telephone line. Sending and Receiving T.38 and Audio Faxes. Music on Hold. Call Transfer. Call Forwarding. Phone Book. Log Book. Random Phone Calls.
Fax Voip Softphone is a powerful and unique SIP / H.323 software telephone that lets users make phone calls, record calls, play audio files into the telephone line as well as send/receive T.38 and audio faxes from one single software application using any Voice over IP (VoIP) telephony provider.
Music on Hold.
Call Transfer. Call Forwarding. Hairpin Call Transfer and Hairpin Call Forwarding (2 call legs).
Audio and Fax panel allows you to send pre-prepared faxes and audio messages in one click.
With Log Book you can easily view call history, view received and sent faxes and listen to call recordings and sent audio messages.
The Phone Book provides a convenient place to store information about your contacts.
Random Phone Calls function can be useful for your business, as well as for different testing purposes. The function allows you to automatically make repetitive phone calls to one or more target phone numbers. This function allows you to play audio messages into the telephone line, as well as to record phone calls.
Using the Fax Voip Softphone Control Panel, you can easily configure the softphone according to your requirements.

Unit Price: EUR 88.06
Total: EUR 88.06
plus 19% sales tax/VAT to EUR 88.06: EUR 16.73
EUR 104.79
Delivery: License key by e-mail
Version: 2.3.1
Language: English
General requirements: Microsoft.NET Framework 2.0 Service Pack 1 or later



Tags: fax voip softphone, phone calls, Random Phone Calls, audio messages, SoftPhone Basic License, telephone line, Voip Softphone Control, audio faxes, repetitive phone calls, Phone Calls function, SIP/H.323 software telephone, H.323 software telephone, Log Book, single software application, Phone Book, target phone numbers, different testing purposes, pre-prepared faxes, EUR, record calls, Fax panel, Hairpin Call Forwarding, Hairpin Call Transfer, audio files, telephony provider, Microsoft.NET Framework, convenient place, store information, Service Pack, Unit Price, sales tax/VAT, General requirements, Hold, Music, Voice, legs, Recording, users, Version, Language, Delivery, e-mail, history, recordings