Author Archives: ISAX

Isax Loopcreator Review

Isax Loopcreator ReviewISAX LoopCreator

LoopCreator is an application that automatically create AutoCAD loop diagram , starting from typical drawings and an Excel project.
Description
The choice of Excel as data source is justified because it is not required any knowledge of relational database to set the data that will be put in the drawings that will be created by the application.

The typicals are .dwg drawings where the engineer will have put text, strictly not multyline, that LoopCreator will recognize and replace with the data found in the Excel project.
It is extremely important to consider that the job developed in the past in your company will not be forgotten. In fact, it will be enough to modify some text in your existing drawings to to adapt them to the content of the Excel project. LoopCreator does not generate drawings, but modify existing ones!
There is no limit in the number of typicals used in the project. the only bond is that they must be in the same folder.
The Excel project must have two worksheets, strictly called "DB" and "GeneralInfo".
On the right it is shown an example of "DB" worksheet, where it is possible to identify, in row 1, the texts that will be searched during the procedure of drawings creation. In the example include in the downloadable file (one AutoCAD drawing and one Excel project), they will be created three drawings, that are the number of raws containing data on the Excel worksheet.
For the drawing numbering, it will be enough to add a text field, as shown in the example, and assign a consecutive numbering in the Excel worksheet, starting from any value and not necessarily from "1".
In worksheet "GeneralInfo" there will be put all the repetive informations, such as the number of document, name of company, overall number of sheets, etc.
The first column ("A") is reserfed in both worksheets of Excel project, for the typical name and the common part of the file name. The column heading ("TYPICAL" e "SAVEAS FILENAME") is not taken in consideration from the software and can be freely modified.
User interface
Simple and intuitive.
It is enough to select Excel file, typicals folder and destination folder. At this point click on button "Create drawings" and wait for the end of job.
Performance
Once initiated, the application works in background, leaving the user free to proceed with other jobs.
From 8 to 20 seconds (depending upon the number of information to elaborate) to compile and save a new drawing, that means more than 2000 .dwg per day!!
Back

Unit Price: EUR 200.00 [Volume discount prices]
Total: EUR 200.00
plus 19% sales tax/VAT to EUR 200.00: EUR 38.00
EUR 238.00
Delivery: License key
Version: 1.1
Language: English, German, Spanish, Italian, French

Get More Information about Isax Loopcreator Review

Tags: Excel project, Excel worksheet, AutoCAD loop diagram, quot, Volume discount prices, drawings, Excel file, EUR, ISAX LoopCreator, relational database, typical drawings, data source, repetive informations, consecutive numbering, drawings creation, destination folder, existing ones, drawing numbering, downloadable file, SAVEAS FILENAME&quot, typicals folder, text field, User interface, AutoCAD drawing, overall number, point click, Unit Price, sales tax/VAT, new drawing, application, example, .dwg, worksheets, company, job, GeneralInfo&quot, column, DB&quot, raws, Description, knowledge, past, fact, content, project., right, texts, Delivery, Version, Performance

Category: Uncategorized

Isax Xlistbox

Isax XlistboxISAX_XListbox is an enhancement of standard Microsoft® Listbox ActiveX. Among its powerful tools, the possibility of choosing colors for each item, setting enabled/disabled status of any single item, indentation of items, horizontal bar for reading long items….. and several new methods for easy interfacing with parent application. Simply add this component to your VB project and you are up and running in seconds. Release Note of version 3.0 Starting from version 3.0 ISAX_XListBox gives the opportunity to add an icon to each listbox item. New properties and methods have been created to manage icons, and old AddItem/AddFormatItem methods have been changed adding a new parameter to point to icon path. Icon resource files must include one single icon. Resize and rendering of icon is performed automatically by the control itself. A property page has been added to control to make easier ActiveX control settings.
Get More Information about Isax Xlistbox

Tags: easier ActiveX control, old AddItem/AddFormatItem methods, Listbox ActiveX, listbox item, Icon resource, single icon, single item, standard Microsoft&reg, easy interfacing, horizontal bar, powerful tools, VB project, enabled/disabled status, parent application, long items, new parameter, property page, new methods, New properties, isax_xlistbox, indentation, version, possibility, enhancement, colors, settings, Note, component

Category: Uncategorized

Isax Timer Activex

Isax Timer ActivexISAX Timer is an enhancement of classic Microsoft® VB Timer ActiveX. Properties are provided to set Timebase (milliseconds, seconds or minutes) and Looping. Interval property, referred to Timebase, can accept a value up to 2.147.483.647. Property ElapsedTime is available only at runtime and if seconds or minutes have been selected as timebase.
Get More Information about Isax Timer Activex

Tags: VB Timer ActiveX, ISAX Timer, classic Microsoft&reg, Interval property, Property ElapsedTime, milliseconds, Looping, timebase, enhancement, runtime, Properties

Category: Uncategorized

Isax Progressbar Activex

Isax Progressbar ActivexISAX ProgressBar is fully configurable.
Just set max and min engineering limits and will be automatically scaled on 0-100% range. No additional calculation is needed in your software.
All configurations of the ActiveX can be accessed through a clear property page.
Starting for revision 2.0, the fading capability has been added, borders visualization can be turned off, the value can be shown or not, with maximum three digits.
Get More Information about Isax Progressbar Activex

Tags: min engineering limits, clear property page, fading capability, borders visualization, ISAX ProgressBar, additional calculation, digits, configurations, revision, ActiveX, maximum, max, range, software

Category: Uncategorized

Isax Modbus Rtu Master Activex

Isax Modbus Rtu Master ActivexISAX Modbus ActiveX provides communication with PLCs, instruments and many other devices which can act as standard Modbus RTU slave stations.
The control can execute Function Codes nr. 1, 2, 3, 4, 5, 6, 7, 15, 16 of Modbus RTU specifications.
Communication can be direct or multidrop.
ISAX Modbus is the best low cost solution to build up your own supervisoring application using the platform you prefere (Office, VB, VC++, etc.).
Release Note of version 3.0
Starting from version 3.0 ISAX Modbus can be used both in singleport or multiport configuration; this means that developer has not to insert more than one ActiveX in his application if protocol must operate on more ports!! All commands can be direct to a specified port or to the default one. Protocol has been improved adding new events, optimizing the speed in communications and extending the capability of controlling ports identified with number greater than 16. For more information check the manual included in download.
Release Note of version 3.1
Parameters have been added to events to identify Slave Address and/or port number where error occurred.
Release Note of version 3.2
Added methods for reading/writing 32-bit data types (both long integer and floating points data), with word/byte swap, in order to enhance the flexibility of the driver.
Enhanced error reporting in methods.
Fixed a bug that could create problem opening ports with a identification number greater than 10.
Communication speed has been further increased, eliminating any delay between master request and slave response.
"Buy now" button has been added to license screen.

Get More Information about Isax Modbus Rtu Master Activex

Tags: ISAX Modbus, Modbus RTU slave, Modbus RTU specifications, ISAX Modbus ActiveX, Function Codes nr, best low cost, Enhanced error reporting, 32-bit data types, Slave Address, slave response, multiport configuration, supervisoring application, information check, long integer, new events, master request, word/byte swap, port number, points data, Communication speed, identification number, ports, version, Note, protocol, methods, PLCs, VC++, quot, default, instruments, devices, stations, delay, control, VB, flexibility, commands, solution, platform, Office, singleport, capability, developer, Parameters, button, communications

Category: Uncategorized

Isax Snpx Activex

Isax Snpx ActivexSNPX provides communication with GEFanuc Series90, Micro90 and Versamax family PLCs via GEFanuc SNPX protocol. It can be used with PLCs’ programming port or communication modules. Two data types not included in GEFanuc specifications have been created (TypeRdint and TypeRreal) to make extremely easy work with double integer and real number formatted in %R memory type. The control doesn’t provide reading/writing functions to %P and %L memories of 90-70 PLC. SNPX is the best low cost solution to build up your own supervisoring application using the platform you prefere (Office, VB, VC++, etc.). Manual included in download file. Release Note of version 3.0 Starting from version 3.0 ISAX_SNPX can be used both in singleport or multiport configuration; this means that developer has not to insert more than one ActiveX in his application if protocol must operate on more ports!! All commands can be direct to a specified port or to the default one. Protocol has been improved adding new events, optimizing the speed in communications and extending the capability of controlling ports identified with number greater than 16. For more information check the manual included in download.
Get More Information about Isax Snpx Activex

Tags: Versamax family PLCs, GEFanuc SNPX protocol, best low cost, GEFanuc Series90, double integer, multiport configuration, data types, memory type, programming port, communication modules, GEFanuc specifications, real number, supervisoring application, download file, information check, new events, ports, version, VC++, default, VB, Micro90, commands, ActiveX, memories, TypeRdint, TypeRreal, work, control, functions, capability, solution, platform, Office, ISAX_SNPX, singleport, developer

Category: Uncategorized

Isax Balance Activex

Isax Balance ActivexActiveX communication control dedicated to data acquisition from serial balances. You can define communication parameters and command strings. The control has been tested with Sartorius, Ohaus and Mettler-Toledo balances; it can also control several other electronic balances with no problems. Balance can even be used in many other simple communication applications. Manual included in download file.
Get More Information about Isax Balance Activex

Tags: serial balances, Mettler-Toledo balances, electronic balances, simple communication applications, command strings, data acquisition, ActiveX communication, communication parameters, download file, Sartorius, Ohaus, control, problems

Category: Uncategorized